View previous topic :: View next topic |
Author |
Message |
uk_vette Lifetime member
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
Posted: Mon Jun 15, 2009 12:29 Post subject: LC3, cluster lights fully operatrional |
|
|
Well, not a big job actually.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://s167.photobucket.com/flash/player.swf?file=http://vid167.photobucket.com/albums/u129/Sinamics/Rear indicators/STP80352.flv"></embed>
Buy 2 of these lamp holders T81555-60700
Buy 2 of these orange lamps T90981-15011
Slip under the back end, near side, then off side, and identify the 2 supply wires, 1 for the indicator, and one for the tail light for each side.
Open the rear trim inside by the jack for the near side, same trim for off side, and find the 2 wires each side, ( I should have made a note before applying insulation tape and sealing all up again)
Carefully expose the copper conductor without damaging any of the strands.
A quick twist with the short (500mm) wire to extend upwards into the respective clusters.
Slip on some flexible plastic protection, and pop the end into the cluster.
The tail light has the correct lamp holder and lamp already fitted, so just connect the wire to the correct terminal in the lamp holder.
The new indicator wire can be connected to the correct terminal on the new lamp holder.
More pic's to follow.
'vette |
|
Back to top |
|
|
Google Sponsor
|
Posted: Mon Jun 15, 2009 12:29 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
uk_vette Lifetime member
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
|
Back to top |
|
|
uk_vette Lifetime member
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
Posted: Mon Jun 15, 2009 12:32 Post subject: |
|
|
Oh what a load of messing.
I was trying to show the indicators flashing, but I think you get the picture. or maybe not.
http://s167.photobucket.com/albums/u129/Sinamics/Rear indicators/?action=view¤t=STP80352.flv
'vette
If this doesn't work, will a mod just delete the whole thread please. |
|
Back to top |
|
|
uk_vette Lifetime member
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
Posted: Mon Jun 15, 2009 12:35 Post subject: |
|
|
THATS IT,
JUST PLEASE DELETE THE WHOLE DAMN THREAD.
'V E T T E
|
|
Back to top |
|
|
Rick ***
Joined: 16 Aug 2006 Posts: 240 Location: Over the hills and far away
|
Posted: Mon Jun 15, 2009 14:19 Post subject: |
|
|
Don't you just love computers
Glad it's all working...we believe you! _________________ Rick |
|
Back to top |
|
|
Pumairl Lifetime member
Joined: 06 Nov 2006 Posts: 59 Location: Cork, Ireland
|
Posted: Wed Jun 24, 2009 13:55 Post subject: |
|
|
Well done uk_vette.
Thanks for the info on doing that, must start that conversion soon.
Did you solder the wire to the tail light bulb holder?? and the indicator bulb holder? |
|
Back to top |
|
|
leon *****
Joined: 20 Apr 2009 Posts: 593 Location: Newcastle UK
|
Posted: Wed Jun 24, 2009 20:51 Post subject: |
|
|
edit the post's and photo names its the gap between "Rear indicators" "Sinamics/Rear indicators/?action" thats doing it try Rear_indicators or indeed just Rearindicators
i now have your fulll reg am off to steal one the same and ring it! ...am not but yo uget the piont _________________ Should I have these bit's left over ?
1998 V8 LC Amazon VX work in progress
2008 pug boy
2009 pug boy
2010 pug girl
^ dogs |
|
Back to top |
|
|
|